SmallRig Articulating Arm with Dual Ball Heads (1/4”-20 Screws) 2070B
Por un escritor de hombre misterioso
Descripción
SmallRig Articulating Arm with Dual Ball Heads (1/4”-20 Screws) 2070B
SmallRig 2070B Overview Featuring a 1/4-20 screw at each end, the 5.5 long Articulating Arm with 1/4-20 Screws from SmallRig can be used to mount
Buy SmallRig Articulating Arm with Dual Ball Heads (1/4-20 Screws) - National Camera Exchange
SmallRig Articulating Arm with Dual Ball Heads 1/4”-20 Screw (2070B), NSHOT
Featuring a 1/4-20 screw at each end, the 5.5 long Articulating Arm with 1/4-20 Screws from SmallRig can be used to mount an accessory on your
SmallRig Articulating Arm with Dual Ball Heads (1/4-20 Screws)
Featuring a 1/4-20 screw at each end the 5.5 long Articulating Arm with 1/4-20 Screws from SmallRig can be used to mount an accessory on your camera rig at almost any angle. Compatible with a wide range of camera components such as a monitor small lights or sound gear the aluminum and stainless steel arm has a payload capacity of up to 3.3 lb. Both ball heads are secured using the single large thumb lever.
SmallRig Articulating Arm with Double Ballheads (1/4 Screw)
SmallRig Magic Arm with Dual Ball Heads (1/4-20 Screw and NATO Clamp) 3875 is compact and lightweight. Both ball heads are 20mm in diameter, in which, one features a 1/4-20 screw and stretchable pins that prevent twisting, and another has a NATO clamp that supports the cage, top plate, etc. with a NATO rail. The adjustable thumb lever helps secure ball head at an appropriate angle and comes with a small magnetic wrench at the bottom to tighten the thumbwheels.
SmallRig Magic Arm with Dual Ball Heads, 1/4 Screw and NATO Clamp
SmallRig Articulating Arm w/Dual Ballheads (1/4” Screw)
【FOR FIELD MONITOR 】With 1/4'' screws on both ends, this product is compatible with a wide range of camera components such as a monitor, small lights,
SMALLRIG Articulating Magic Arm with Double Ballheads (1/4 Screw) Monitor Mount for Field Monitor, Lights, Audio Recorders - 2070
SmallRig Articulating Arm (9.8in) 2066B
SmallRig Articulating Arm with Dual Ball Heads (1/4-20 Screw and 3/8”-16 Screw) 2212C @ Helipilt
Featuring a 1/4-20 screw at each end the 5.5 long Articulating Arm with 1/4-20 Screws from SmallRig can be used to mount an accessory on your camera rig at almost any angle. Compatible with a wide range of camera components such as a monitor small lights or sound gear the aluminum and stainless steel arm has a payload capacity of up to 3.3 lb. Both ball heads are secured using the single large thumb lever.
SmallRig Articulating Arm with Double Ballheads (1/4 Screw)
de
por adulto (el precio varía según el tamaño del grupo)