Holder for Apple MagSafe Charger (Carbon Fiber) – 67 Designs
Por un escritor de hombre misterioso
Descripción
IMPORTANT - PLEASE READ; The Apple® MagSafe system has magnets that are not strong enough for any dynamic environment like driving. They are suitable only for use in steady state environments like at a desk or around the home. Installation is Easy. Peel off the USA Sourced 3M adhesive and attach to the back of the Apple® MagSafe "puck" Benefits Superior materials and finish made in the USA. Use as either a base to attach to a surface or on a device holder that has AMPS mounting points. Rapid installation in minutes. Holes for the non-square rectangle AMPS fitting Product Details Pack contains: MagSafe Holder with a 20mm ball installed to attach a Carbon Fiber Series arm (sold separately) Made of carbon fiber and aluminum. Item Number: G01744 - Carbon Fiber Important: this pack does NOT contain arms or device holders. Be sure to add desired items to your order. Shown in images for example only. Apple™ is a registered trademark of Apple.
Note: This does not include the Apple MagSafe Charger. You must provide the Apple component. This CNC machined Carbon Fiber holder contains a 20mm ball and comes with pre-installed 3M adhesive for you to attach an Apple MagSafe Charger. We do not recommend the Apple® MagSafe for offroad driving! If you are looking for a true trail-proven magmount, then we strongly recommend the MagMount G3™ Installation is Easy. Peel off the USA sourced 3M adhesive and attach to the back of the Apple® MagSafe Charger (sold separately). Benefits Superior materials and finish. Designed and made in the USA. Includes a metal 20mm ball to attach to a fixed carbon fiber arm. Rapid installation. Product Details Pack contains: Carbon Fiber MagSafe Holder (G1 or G2 as selected above) with a 20mm ball installed to attach to a Carbon Fiber Series arm (Arm sold separately) Made of carbon fiber and aluminum. Important: this pack does NOT contain the Apple® MagSafe charger, case or arm. Be sure to add desired items to your order. Shown in images for example only. Important: Make sure you are using an Apple® approved (MFI certified) MagSafe compatible case from Apple®, Pitaka™ or other reputable provider. CAUTION: Some customers using the MagMount G3 (and from other manufacturers) have reported that sometimes Apple branded OEM leather iPhone cases can become more slick or polished over time vs a plastic or silicone case. 67 Designs has tested this and in some cases the new factory can make the finish slick or with well worn cases it can be slick. This means that the Apple leather cases may have diminished 'staying power' on either an Apple MagSafe Charger or a MagMount G3™. If you have an Apple OEM leather case, you might wish to consider the 67 Designs Universal for Phones G2™. Build Information Materials: USA (36%), Asia (64%)US Manufacturing Processes: Anodizing, Laser, Assembly & Packaging, QA.Place of Manufacture: Dallas, Texas, USA Single Source Provider & Company Ethos Designed by: 67 DesignsR&D by: 67 Designs Manufactured by: 67 Designs Sold by: 67 DesignsFulfilled by: 67 DesignsCustomer Service by: 67 Designs Our products are proudly designed, made and supported by 67 Designs staff. The research, development and ongoing refinement of every product is done in Dallas, Texas. It is by listening and working directly with our customers that our business continues to evolve and go from strength to strength. We are passionate about working with our fellow Americans that understand the importance of developing US manufacturing skills and capabilities as well as our mission to truly strengthen our industrial base. Apple® is a registered trademark of Apple.
Note: This does not include the Apple MagSafe Charger. You must provide the Apple component. This CNC machined Carbon Fiber holder contains a 20mm ball and comes with pre-installed 3M adhesive for you to attach an Apple MagSafe Charger. We do not recommend the Apple® MagSafe for offroad driving! If you are looking for a true trail-proven magmount, then we strongly recommend the MagMount G3™ Installation is Easy. Peel off the USA sourced 3M adhesive and attach to the back of the Apple® MagSafe Charger (sold separately). Benefits Superior materials and finish. Designed and made in the USA. Includes a metal 20mm ball to attach to a fixed carbon fiber arm. Rapid installation. Product Details Pack contains: Carbon Fiber MagSafe Holder (G1 or G2 as selected above) with a 20mm ball installed to attach to a Carbon Fiber Series arm (Arm sold separately) Made of carbon fiber and aluminum. Important: this pack does NOT contain the Apple® MagSafe charger, case or arm. Be sure to add desired items to your order. Shown in images for example only. Important: Make sure you are using an Apple® approved (MFI certified) MagSafe compatible case from Apple®, Pitaka™ or other reputable provider. CAUTION: Some customers using the MagMount G3 (and from other manufacturers) have reported that sometimes Apple branded OEM leather iPhone cases can become more slick or polished over time vs a plastic or silicone case. 67 Designs has tested this and in some cases the new factory can make the finish slick or with well worn cases it can be slick. This means that the Apple leather cases may have diminished 'staying power' on either an Apple MagSafe Charger or a MagMount G3™. If you have an Apple OEM leather case, you might wish to consider the 67 Designs Universal for Phones G2™. Build Information Materials: USA (36%), Asia (64%)US Manufacturing Processes: Anodizing, Laser, Assembly & Packaging, QA.Place of Manufacture: Dallas, Texas, USA Single Source Provider & Company Ethos Designed by: 67 DesignsR&D by: 67 Designs Manufactured by: 67 Designs Sold by: 67 DesignsFulfilled by: 67 DesignsCustomer Service by: 67 Designs Our products are proudly designed, made and supported by 67 Designs staff. The research, development and ongoing refinement of every product is done in Dallas, Texas. It is by listening and working directly with our customers that our business continues to evolve and go from strength to strength. We are passionate about working with our fellow Americans that understand the importance of developing US manufacturing skills and capabilities as well as our mission to truly strengthen our industrial base. Apple® is a registered trademark of Apple.
Bulletpoint MagSafe Compatible Phone Holder without Wireless Charging - Bulletpoint Mounting Solutions
Holder for Apple MagSafe Charger (Carbon Fiber) – 67 Designs
Bulletpoint RubiGrid Dash Mount Platform Phone Holder for 2018-2023 Wrangler JL (NOT 4xe) + 2020-2023 Gladiator - Jeep Compatible Multi-Device Mount : Automotive
Overview, Universal for Phones G2 was designed to achieve these simple objectives., Be the #1 adventure-proven and highest quality single handed phone
Universal for Phones Device Holder G2
The Universal for Phones G2™, the MagMount G3™ and the Carbon Fiber MagSafe Holder in Action.
My phone mount solution Jeep Wrangler 4xe Forum
MONOCARBON Carbon Fiber Case for iPhone 14 Pro Max 6.7'',[Military Grade Drop Protection] Compatible with Magsafe,Slim & Durable Anti-Scratch iPhone 14 Pro Max Cover : Cell Phones & Accessories
67 Designs Releases Apple MagSafe Mount - OutdoorX4
The Ultimate iPhone Mount with Apple MagSafe
Support Magsafe cases, securely mount your iPhones in the car vent, dashboard or any flat surface. Crafted from quality aluminum and heat-resistant plastic, features neodymium magnets for a perfectly balanced hold -- no worries about your phone slipping off or harming your car's dashboard. Get your hands-free drive on!.
Syncwire for MagSafe Car Mount - 360° Rotation Magnetic Phone Holder for Car Dashboard, Strong Magnets Car Phone Holder Mount Compatible iPhone 15
MagSafe AND Magnetic Mount in one - the unicorn Jeep Wrangler Forums (JL / JLU) -- Rubicon, 4xe, 392, Sahara, Sport
Phone Mounts for the Overlander :: Buyer's Guide
MagMount G3 Device Holder – 67 Designs
Jeep® JKMount Pack Options (2011-2018) – 67 Designs
de
por adulto (el precio varía según el tamaño del grupo)