ANCEL ELM327 V1.5 Wireless Code Reader Bluetooth OBD Scanner EOBD OBD2 Scanner Read Clear Trouble Codes Check Engine Light OBDII Car Scanner Automotive Diagnostic Scan Tool Auto Adapter
ANCEL ELM327 V1.5 Wireless Bluetooth for Android OBD2 scanner only works for engine modules. It can be work on most vehicles purchased in the USA model year 2000 or newer! Vehicles in other countries or regions that are OBD II compliant are also supported. Whatever gasoline or diesel vehicle, the code reader can be work on it.
Read trouble codes, both generic and manufacturer-specific, display their meaning (over 3000 generic code definitions in the database).
Display current sensor data, including:
1. Engine RPM
2. Calculated Load Value
3. Coolant Temperature
4 Fuel System Status
5. Vehicle SpeedV2.1
6. Short Term Fuel Trim
7. Long Term Fuel Trim
8. Intake Manifold Pressure
9. Timing Advance
10. Intake Air Temperature
11. Air Flow Rate
12. Absolute Throttle Position
13. Oxygen sensor voltages/associated short term fuel trims
14. Fuel System status
15. Fuel Pressure
Features:
1. Functions: Use Bluetooth OBD2 Adapter with APP on your Android phone to Read/clear error codes, display their meaning, show current sensor data, turn off MIL, find out why check engine light is on before paying visit to a Mechanic
2. Compatible Cars: Support 1996 and newer gasoline vehicles which are fully standard OBD2 compliant. NOT fit hybrid cars, pickups & trucks with 24V voltage
3. System and App: Compatible with Android phone, Recommend apps as Torque Lite(free) Torque Pro(about 4.99, OBD Fusion, and DashCommand etc. Turn your phone into a diagnostic scan tool and real-time performance monitor
4. View car performance, sensor data (Engine coolant & oil temperature, O2 Readings, Mass air flow, Speed, Fuel Trim, etc.), prepare smog test, monitor fuel economy
5. ELM327 works with 12 V gasoline & diesel OBD2 protocol vehicles
6. Not support 24 V diesel / trucks
7. Bluetooth version supports android phone, connect via Bluetooth
Support Vehicles:
American car compatible with standard OBD2 protocols after 1996:
for Chrysler, Ford, GM, Jeep
European car compatible with standard OBD2 protocols after 2004:
for Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Volvo, VW, Ford, Jaguar
France car compatible with standard OBD2 protocols after 2006:
for Citron, Fiat, Renault, Peugeot
Not Support for Renault Clio 2/Megane/Dacia Logan,
Japanese car compatible with standard OBD2 protocols after 2005:
for KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota
Support Protocols:
ISO9141-2(5 baud init, 10.4Kbaud)
ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (fast init, 10.4 Kbaud)
ISO15765-4 CAN (11bit ID, 500 Kbaud)
ISO15765-4 CAN (29bit ID, 500 Kbaud)
ISO15765-4 CAN (11bit ID, 250 Kbaud)
ISO15765-4 CAN (29bit ID, 250 Kbaud)
SAE J1939 CAN (29bit ID, 250*Kbaud)
USER1 CAN (11*bit ID, 125*Kbaud)
USER2 CAN (11*bit ID, 50*kbaud)
*default settings (user adjustable)
Note:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol.
Please send us email like this format: xx, 2005, 2.0cc, Diesel, we will check it for you, thanks.
Packaging:
1 * ELM327 Scanner
1 * Manual